Users of Sony Smart TVs have discovered a mistake that they are all too familiar with: “Sony TV keeps rebooting” If you have a Sony TV from the year 2020, the problem is most likely due to the TV software crashing following a firmware update. Although a factory reset should resolve the problem, there are times when it does not.
We offer a simple troubleshooting method that anyone can use to fix the Sony problem you’re having with your Smart TV. With these simple steps, you’ll be able to get your television back up and running in no time.
What’s the deal with my Sony Smart TV resetting all the time?
There are a variety of reasons why your Sony TV keeps rebooting. Unplugging your TV from the power source, allowing it to shut down for a few minutes, and then connecting it back in can provide a rapid cure to this problem by resetting the TV’s settings.
While this is a typical problem, there are a few more reasons why your Sony Smart TV keeps resetting.
- Your firmware was not properly installed.
- There’s a problem with your power cord.
- Overheating is a problem with this device.
- It is necessary to update the software.
How to repair the Sony smart TV is constantly rebooting
We understand how aggravating the Sony Smart TV error can be, therefore we’ve compiled a list of the best solutions for your Sony TV problem.
Examine the power source
Checking the power source is one of the simplest places to start. The TV may be glitchy and reset if there are any loose cords, bent cables, or troubles with an extension. Wiring put beneath heavy things, such as TV sets or speakers, may cause issues with your TV wires. To ensure that the electricity to your TV is working properly, we recommend using a new plug and inspecting all of your cords for any kinks.
If your power source is working properly, the next step is to power cycle your device. This is a method of rebooting your smartphone without wiping all of your data, as a forced factory reset would. To power cycle your Sony Smart TV, follow these steps:
- Unplug your TV from the wall outlet and set it aside for about 10 minutes.
- Then, for 5-10 seconds, press and hold the power button on your television.
- Reconnect the power to your TV and turn it on.
Read More:
Check to see whether your television is overheated
Your television can overheat, even if you don’t generally worry about it. This might happen for two reasons: your TV isn’t in a well-ventilated area, or the settings on your TV make it difficult to run.
To prevent your TV from overheating on the outside, keep it away from heat sources like radiators and heaters. If your TV is against a wall, you might want to consider pushing it slightly forward to improve airflow. Finally, to avoid dust build-up, clean out the ports and behind the TV on a regular basis.
Make sure your visual settings are dialed down to less than 80% from the inside; when all of your settings are set to 100%, the TV may struggle to function.
Upgrade your software
If your television is linked to the internet, it should update automatically. However, this does not always happen, so it’s crucial to check for any upgrades on your TV to ensure it’s performing to its full potential. Here’s how to manually update your Sony Smart TV:
- Use the settings button on your remote or the menu on your screen to change the settings.
- Select Customer Service.
- Choose Software Update.
- Then select Network and your Wi-Fi network.
- Then, to install the update, select yes or OK.
- Allow 5-15 minutes for your television to catch up.
Turn off the sleep mode
Another setting on your Sony Smart TV that could be causing problems is the sleep mode. Although turning off the Sleep timer or Idle TV standby function should not affect your TV, several customers have stated that doing so fixed their problem. We offer step-by-step instruction for you if you’re not sure how to adjust your sleep settings
To turn off sleep timers, follow these steps:
- Your remote control’s home button should be pressed.
- Then, in your TV’s settings, select timers.
- Choose your sleep timings and turn them off.
To disable the idle standby mode, follow these steps:
- On your remote control, press the menu button.
- Select Settings, then Setup, and then OK.
- Press OK once more after scrolling down to Other Settings.
- Locate auto-standby and turn it off using the arrows.
Remove any devices that aren’t needed
External gadgets connected to your TV could be the source of your Sony Smart TV’s constant rebooting. If you have any additional devices plugged in, such as an Xbox, PlayStation, or a Smart TV device like a Firestick, unplug them while they’re not in use.
By eliminating these, you may discover that one of these external devices is the source of the problem.
Factory Reset (forced)
If your Sony Smart TV encounters a firmware fault, it may reboot again. To fix this, you’ll need to conduct a forced factory reset on your device. The forced factory reset will completely reset your TV, making it function as if it were a brand new device.
Although this can be inconvenient because all of your logins and app downloads will be lost, it is one of the few remedies that is practically certain to stop your TV from rebooting. To perform a factory reset on your television, follow these steps:
- Select the home button on the TV remote.
- Choose your preferences, then go to Device Preferences > About.
- Select Factory Reset > Storage & Reset after that.
- After that, select Reset and then Erase Everything.
- You will then be prompted to confirm that you want to delete all data from the device; simply hit yes to proceed.
It may take a few minutes for the device to shut down, but after it has, you may switch it back on and set it up as a new device.
Conclusion
When it comes to fixing the reboot issue with your Sony Smart TV, we hope one of our solutions worked for you. If you continue to have problems with your Sony TV, we recommend contacting Sony directly, as they will be able to give you expert product support. See more useful articles at my website blog2success.net.