Sanyo, based in Japan, has been known for producing high-quality televisions since its founding in 1949. This is why it’s so aggravating to be saddled with a Sanyo TV Remote that suddenly stops working, rendering your Sanyo TV useless. This is true whether you have a brand new or older Sanyo TV Remote. Continue reading to find out why your Sanyo TV Remote not working and how to fix it.
Remove the batteries from your Sanyo TV Remote if it isn’t working. For thirty seconds, press and hold the power button on the remote. Clean the battery contacts with a little piece of cloth. After thirty seconds, remove the batteries and replace them with new ones.
Sanyo TV Remote doesn’t work
If your Sanyo TV Remote isn’t responding and it’s not because of a dead battery, you’ll need to resync the remote with your TV. This, hopefully, will solve the problem. If not, proceed to the next stage in the troubleshooting process, which is outlined below.
If your Sanyo TV remote isn’t working or responding, point it straight at the television. Simultaneously press the Rewind and Fast Forward buttons. Check to see if your Sanyo TV Remote has been connected with your Sanyo TV.
The remote control on my Sanyo TV won’t change channels
Nothing is more irritating than settling down to watch your favorite show and discovering that your Sanyo TV Remote will not change channels. This type of issue normally necessitates a power cycle reset, which is simple to execute.
Do a power cycle reset if your Sanyo TV Remote isn’t working and won’t change channels. Remove the power cord. Check that all lights are turned off, then wait thirty seconds before reconnecting the power cable. Then check to see whether the remote has changed channels.
For this problem, you may also try replacing the batteries in your Sanyo TV Remote and then pressing the power button on the Sanyo TV Remote for thirty seconds and see if that solves the problem and your Sanyo TV Remote starts changing channels again.
Buttons on the Sanyo TV remote aren’t working
Due to wear and tear from friction, all TV remotes eventually wear out. This can result in a completely useless remote with non-functional buttons. If cleaning the buttons on your Sanyo TV Remote does not cure the problem, you should probably open the remote’s cover and clean the circuit board.
Open the Sanyo Remote Control and gently peel away the two parts of the battery cover if your Sanyo TV Remote is not working and the remote buttons are not working. Check to see if all of the buttons are operating properly after cleaning the circuit board.
Furthermore, any buttons that aren’t working can be replaced with new buttons or appropriately sized pieces of aluminum foil.
What is the procedure for resetting a Sanyo TV remote?
With a few essential actions, you can rapidly reset your Sanyo TV Remote. This will return the remote to its original factory settings, which should resolve the issue. If a reset isn’t possible, you’ll either need to visit a professional Sanyo Technician or buy a new Sanyo TV Remote.
Push the power button on the remote if your Sanyo TV Remote isn’t working and has to be reset. The Reset Button is found on the Sanyo TV Remote’s lower left side. On the remote, press Menu and scroll down until you find Factory Reset. Then press OK, then Reset.
The sensor on the Sanyo TV remote isn’t working
Your Sanyo TV Remote sends out an infrared light signal, which your Sanyo TV picks up. Your Sanyo TV Remote will not be able to control the TV if this infrared light is not created.
Turn off the power to your Sanyo TV for around thirty seconds if your Sanyo TV Remote isn’t working or the Sanyo Remote’s Sensor isn’t working. Hold the power button on the television for roughly thirty seconds before releasing it. Check to verify if the Sanyo TV Remote works after reconnecting the TV’s power supply.
You may also use a camera or the camera on your smartphone to determine if your Sanyo TV Remote is sending an infrared signal. After turning on the camera, point your Sanyo TV Remote at the camera’s screen or viewfinder. Any button on the remote should be pressed and held for several seconds. Examine your camera’s viewfinder or your phone’s screen to check whether you can see the infrared light when any button on your Sanyo TV Remote is pressed.
Blinking red light on Sanyo TV remote
When the red light on your Sanyo TV Remote blinks, you won’t be able to change channels, but you’ll also be unable to alter and modify the volume or use any of the other remote features. This issue is usually caused by a blockage between the remote and the Sanyo TV, or by your Sanyo TV Remote not being in complete sync with your Sanyo TV. This issue is usually resolved in a timely manner with quick and effective troubleshooting.
Check your Bluetooth connection and pairing if your Sanyo TV Remote isn’t working and its red light is blinking. Make sure your Sanyo TV Remote is in perfect harmony with your Sanyo TV. Also, make sure the Sanyo TV Remote’s batteries are fully charged.
Additionally, ensure that your Sanyo TV Remote is not too far away from your Sanyo TV. Look for anything that might be preventing the direct connection between your remote and the television. Any wireless speakers or phones that get in the way of the Sanyo TV Remote’s usual operation can cause it to malfunction.
See more useful articles at my website blog2success.net.