Having a TV that turns on is inconvenient and frustrating, especially if you don’t know what’s wrong with it. The issue could be minor or significant. However, you must first determine it on your own before taking it to a repair shop.
There are a few reasons why your RCA TV won’t turn on, though. When you hit the power button, for example, it may be stuck, the red power light may flash, or nothing happens at all.
To troubleshoot it yourself, you don’t need to know the exact problem, but you do need a guide that can help you fix it quickly. As a result, today we’ll walk you through troubleshooting the RCA TV that won’t switch on step by step.
RCA TV will not turn on
Check out these five ingenious DIY solutions for resolving the issue.
1. Check for a blown power cord
The power cord is the first thing to look for. One of the reasons your RCA TV won’t turn on could be because the power cord is damaged or frayed.
If your power cord is damaged, simply replace it with a new one. Also, make sure the power cord’s tip is fully inserted into the back of your television.
2. Examine the Power Switch
Here’s what you should do if your RCA TV won’t turn on because the power button is stuck:
- To gently push the button, try using a flat-headed screwdriver or even a coin.
- If that doesn’t work, push the button firmly with a thin object like a paper clip or straightened paper.
- After that, remove the battery from the remote control and press and hold the power button for at least 10 seconds.
- After that, replace the battery in the remote control and press the power button once more.
Is your RCA television on right now? If that doesn’t work, try pressing the power button using an alternative technique. If you are unable to resolve the issue on your own, simply hire a professional to assist you.
3. Check for a Short Circuit in your Television
If you still can’t get your RCA TV to turn on after trying all of the above suggestions, it’s possible that your television has a short circuit.
Simply remove the back cover of your television and inspect the two round metal connections (also known as pins) connected to the power cord. There is a short circuit if one of them is not correctly connected, and your RCA TV will not power on.
Replacing the faulty pin with a new one is a good idea, and then try again. Also, ensure sure there are no loose cables within the television. If they are, a short circuit will occur, resulting in the same effect. As a result, simply tighten all of the cables until they are secure.
4. Poor connection between the remote control and TV
If you’re using a universal remote control, try pressing the letter “L” button on the remote control. This should allow you to verify that the connection between your remote control and your television is functional.
If it doesn’t work, your remote control isn’t transmitting the right signals to your TV, and your RCA TV won’t switch on.
Finally, simply change the batteries in your remote control and give it another shot.
5. Examine the Fuse
On older RCA televisions, there is a fuse inside the rear of the set that controls the power to the set. Due to the passage of time, this fuse may become damaged. Simply replace it and try again if this is the case. If the fuse is fine but your RCA TV still won’t switch on, move on to the next possible problem.
6. Check the Surge Protector
Surge protectors protect your household gadgets from surges of electrical current. A defective surge protector, on the other hand, can cause your RCA TV to cease working completely.
Simply unplug the surge protector from the wall and reconnect your television to the socket. If it works, the issue is with the surge protector, which you should replace. If it doesn’t work, the issue is somewhere else.
7. Make sure you have an HDMI cable
RCA televisions feature an HDMI connection that allows you to connect your HDTV to a cable box or satellite receiver. Your cable or satellite provider may, in some situations, disable the connection between your RCA TV and your equipment. As a result, your TV may be unable to turn on. To see if this is the case, do the following:
- Simply disconnect your RCA television from the wall.
- Reconnect everything after removing the RCA connectors from the HDMI cable’s ends.
- If your cable or satellite provider is restricting the connection, this will allow you to watch your shows uninterrupted.
If none of these measures work, you should hire an electrician to inspect your home’s wiring and make sure it’s in good working order.
8. Clean and Dust Your TV
Dust and filth can cause a slew of issues with your television set. It can, for starters, lead it to stop working entirely. Static electricity, which can damage your TV, can also be caused by dust and debris. As a result, it is critical that you keep your television clean.
To clean the television, follow these steps:
- Simply use a moist cloth to clean it.
- Make sure the television is free of dust and trash.
- Then use a hose or a shop vacuum to blow the setup down.
- This will make your RCA TV suitable to use again.
9. Reset the RCA television
On the front of RCA TVs, there is a simple reset button. For at least 10 seconds, press and hold this button. Then, unplug and re-plug your television from the wall. You should be able to turn your TV back on after this. If this doesn’t work, you’ll need to hire an electrician.
10. Read the Instructions
Your RCA manual will most likely include information on how to keep your television in good working order. If there are any instructions, follow them. You may need to contact an electrician if this is not the case.
That is all there is to it. These pointers will help you keep your RCA television in good working order for a long time. Hopefully, you won’t need to use the majority of these suggestions. However, if any of these are required, you should be aware of how to care for your RCA television. See more useful articles at my website blog2success.net.