This article from Fiestagrill.net will show you how to remove a kitchen cabinet. Remove kitchen cabinets as part of a kitchen renovation. If you want to use the cabinet again, you can usually take it off the wall with no damage, so you can do that if you want to. Before you start cooking, make sure the room is ready. Take all your dishes, pots, and pans out of the cabinet. You should then stop the water and electricity to your kitchen.
This is how it works: Remove the trim, dismantle the cabinets, and disconnect them from the walls one at a time until they are free from the walls. With a little patience, you can take these cabinets down without having to hire a professional.
How to remove a kitchen cabinet like a professional?
Step 1
Make sure you clean out all of your cabinets before you go to bed. It’s important to get rid of all of your plates, silverware, pots, pans, and other things that are in your cabinets before you start the job. These could break during the process of getting them out if they aren’t kept safe. They will also add a lot of weight to the cabinets, which will make it more difficult to get them out of the house.
Don’t just put these things to the side. They should be moved to a different room so they don’t get in the way.
If you’re doing a lot of work in your house, cover these things with a sheet. This stops dust and other things from getting on your things.
Step 2
Remove water from the sink. Base cabinets are usually attached to the countertop, which means that you’ll have to take the counter down to get the base cabinets off of it. First, you have to take out the sink. Turn off your sink’s water supply so that you don’t have a flood. [2]
Then, look under the sink. These are metal knobs on the side of your sink’s pipes. Turn this knob to the right until it stops to turn off the water.
The water should always be off. Turn on your kitchen sink and make sure there is no water coming out. Turn the valve even more if water still comes from the sink.
Step 3
Remove the electricity from the room. During the process of removing the counters, you may have to move some wires out of the way. The electricity in this area should be turned off to keep you safe. In your home, go to the breaker box and look for the switch. When you open it, look for the circuit breaker that controls your kitchen’s electric power. If it was done right, the breakers should be marked. You can turn off the fuse in your kitchen by pulling it.
Breaker boxes are usually found in the basement or the laundry room, but they can also be found in other places.
To turn off all of the electricity in your home, you can turn off the main switch. If you don’t need power in the rest of your house, you can turn off this switch. This breaker is on the top of the service panel. It is a double-wide switch that you can turn on and off.
If your kitchen is old, you might find hidden wires and outlets when you do this job. If you find wires, cover them with rubber plugs. You can buy these at a hardware store near you.
Step 4
If you want to keep the countertops, cover them up. You should protect your countertop if you want to keep it and use it with your new cabinet. Put a thick sheet over it to keep dust and other things from getting on it. Lay a piece of flat wood on top of the blanket to protect the counter if you drop something.
If you’re not going to use your countertop again, there’s no need to protect it with a cover. Allow it to get dirty and damaged while you work, so that you can clean and repair it.
Step 5
This is final step on how to remove a kitchen cabinet. Remove all the trim and molding from the cabinets to make them look more clean and simple. Decorative trim and molding is usually held in place with staples or small nails and should be easy to remove. Use either a crowbar or the claw of a hammer to get these things out of the way. The blade should go between the trim and the cabinet. Make a few hammer blows to the crowbar to get it into the crack if the space is tight. Then, try to get the trim off.
Keep an eye out for trim on the walls and the bottom of the cabinets. A lot of the time, this wraps around corners and can be hard to see.
If you damage trim and molding, don’t worry about it. These parts can’t be used again. They sometimes break when you try to get them off.
If you want to keep the cabinets, be careful when you try to remove the wood trim. You could scuff or dent the wood.
Wear gloves when you handle the trim to avoid getting splinters or staples in your hands.
Read more:
How to remove a kitchen cabinet with Wall Cabinets
Step 1
To help you work on the wall cabinet, put some blocks under it. It won’t fall to the ground if your hand slips while you take the cabinet out. It’s important to know how far apart the countertop and the bottom of the cabinet are. It’s then time to cut four pieces of wood to that length. Place one under each corner of the cabinet you’re going to remove.
In terms of lumber size, use something that is thick enough to hold up the weight of the cabinet. Blocks that measure 2 in x 4 in (5.1 cm x 10.2 cm) or 4 in x 4 in (10 cm x 10 cm) should work.
These supports are easy to move around, so you can move them from cabinet to cabinet as you work.
These supports are only meant to hold the cabinet for a short time while you get your hands back on it. They aren’t strong enough for you to put the whole weight of the cabinet on.
Step 2
Remove the doors from the cabinet. The doors are screwed into the cabinet through their hinges. Hinges are where the door opens. There are screws that hold the door to the cabinet. Then, use a screwdriver or drill to remove all of them. The door will then be easy to remove.
When you remove the last screw, hold on to the door. If it falls, it could hurt your countertop or hit you on the bottom of your foot.
If you don’t plan to use the cabinets again, there’s no need to be gentle with them. On most cabinets, if you open the doors too far and push them, they’ll just fall off. If you’re going to get rid of the cabinets anyway, use this method to save time and money.
You should keep the door hinges and screws you remove from the cabinets if you want to keep them. Put them in a plastic bag or container to keep all the parts together and make sure they stay where they are.
If you use a power drill, make sure you wear goggles and gloves to avoid getting hurt.
Step 3
Remove the shelves. You should take out all of the shelves before you start taking down the cabinet. Different cabinets use different ways to keep their shelves in place. Most of the time, the shelves rest on top of plugs in the cabinet wall. There is no need for you to do anything else. Lift the shelves off these supports and then guide them out of the cabinet.
Make sure that the shelves are screwed into place. Then, find all of the screws that keep the shelf in place. You can use your screwdriver or drill to remove all the screws from the surface of the table. Remember to hold on to the shelf when you remove the last screw, so it doesn’t fall off and break.
Remove the screws and plugs from the cabinets here. You’ll need them if you want to keep them and use them again. You can keep track of all the parts by putting them in a plastic bag or other container.
Step 4
Remove the screws that hold the cabinets together, and then the cabinets will come apart. After cabinets are put in, they may be screwed together. You can look inside the cabinets to see if there are screws on the sides of them. In this way, these keep the cabinets from moving around. If you see screws like these, take them out before you remove the cabinets from the wall.
First, look for screws that hold cabinets together. They are usually found near the hinges of the doors, so start there first.
Even though installers may not always do what they’re told, there may be screws in different places. Use a flashlight and look around with your hand to see if there are any more screws.
Step 5
Remove the screws that hold the cabinet to the wall. The cabinet should be screwed into the wall through the back. A row of screws inside the cabinet should run across the top. This is the most common place where cabinets are connected to each other. Use either your power drill or a screwdriver to remove each of the screws from the wall. Make sure to turn screws counterclockwise with a screwdriver if you want to get them out of the way with one.
Also check the bottom of the cabinet, because extra screws can be found there.
If you have a partner, have them hold on to the cabinet while you remove the screws. This will keep the cabinet from falling to the ground.
Step 6
To move the cabinet, pull it off the wall. As soon as all the screws are removed, the cabinets should be able to slide off the wall without any trouble. Hold on to the cabinet with both hands and start pulling it towards you. It’s time to move it.
It will fall off the wall, and when it does, you’ll have to hold its full weight. You don’t want to get hurt or drop the cabinet.
Step 7
Repeat this for each wall cabinet. If you have a lot of wall cabinets, make sure you follow the same steps for each one. One by one, remove each cabinet and put it in a safe place where no one will trip over it.
As you remove more cabinets, you may want to speed up or be less careful. Because a bad move could cause an injury, don’t do this.
How to remove a kitchen cabinet by taking the Base Cabinets down?
Step 1
The drawers in the cabinet need to be pulled out, so do that. In most cases, the base cabinet has drawers instead of shelves. Empty the drawers before taking them apart. There are a lot of different types of drawers, and each one is different. Free-rolling drawers should be easy to get out. After pulling the drawer out to its full length, lift it up. This should get the cabinet out of the way, so you can slide the drawer all the way out.
In order to open drawers that use a different mechanism, you can unscrew the brackets or push a release tab on one side to get them free.
The parts of the cabinets and drawers that you remove should be kept if you plan to use them again.
Place the old drawers out of the way so you don’t trip over them as you work. This way, you won’t get hurt.
Step 2
Another step on how to remove a kitchen cabinet is that pull out the kitchen sink. Removing base cabinets takes more work than removing wall cabinets. Step 1: Take the kitchen sink out. Remove all the pipes that lead to your sink. Before you do anything else, cut through the caulking and unscrew your sink from the countertop. It’s time to move it. Lift it up and move it out of the way. [18]
Before you do any work on the sink, make sure the water is off. There can be a flood if the water is on.
Gloves are important if the sink has sharp edges.
If you’re getting a new sink, don’t be afraid to break it. You should be careful if you’re going to keep the sink.
Step 3
Lift up the counter. Remove the countertop before moving on to the next part of the project. Check the inside of the base cabinets to see if screws have been drilled through the top. There are screws that connect the cabinets to the counter top, like this one. This will free up the counter top. After, check the countertop to see if it can be lifted with a lot of force after. if it doesn’t move, you missed a screw.
It is possible for a kitchen counter to have a layer of caulk between it and the wall. A razor blade can be used to cut through the caulk on your counter and free it. Wear gloves so you don’t cut yourself.
Be careful if you plan on reusing your countertop. Remove it gently and avoid knocking it into anything when you carry it out of the room.
Step 4
Unfasten any screws holding the cabinets together. It’s less common for base cabinets to be screwed together than wall cabinets, but it’s still possible. Look inside the cabinets along the sides and see if there are any screws connecting the cabinets. Remove them if you see them.
If you try to pull the cabinets out later on and they seem stuck together, you may have missed a screw. Stop working and look again. If you pull the cabinets out while they’re still attached, you’ll rip a hole in the wood.
Step 5
Remove the screws connecting the cabinet to the wall. Look in the back of the base cabinet and find the row of screws fastening it to the wall. Remove all of these screws. [21]
Screws can be difficult to spot in the back of your cabinets. Stick your head inside if you have to, and use a flashlight to locate them all. Even if you miss only one, you won’t be able to remove the cabinets.
Step 6
Slide the cabinet away from the wall. Now that the cabinet is free, work it out of position. There may still be caulking holding the cabinet in place, so pull hard to get the cabinet away from the wall. Drag the cabinet into a new location when it’s free from the wall. [22]
You might have to lift the base cabinets out of position. Sometimes they sit in a compartment on the floor and have to be lifted out.
If the cabinet won’t budge, you may have missed a screw in the wall. Stop your work and check again, removing any screws you left behind.
Step 7
Repeat the same procedure for each base cabinet. You may have several base cabinets to remove. Follow these steps to safely remove each one, and remember to put the loose cabinets in a safe place where no one will trip on them.
Continue working carefully as you proceed. Keep your gloves and goggles on, and hold the cabinets tightly so you don’t drop them on your foot.
Conclusion on how to remove a kitchen cabinet
Fiestagrill.net answered how to remove a kitchen cabinet but what’s the next thing you need to do? Will you change them to have a modern, sleek look, or was this just the first step in a bigger kitchen makeover? Taking down your cabinets was a big project and a step toward your dream kitchen that you should be proud of.
