By following this tutorial of Fiestagrill. net, you will be one step closer to answering how to calculate linear feet for kitchen cabinets. For someone who has never done something like this before or has little expertise with measuring tapes, calculating the linear feet for your kitchen cabinets can seem difficult. That is why we have created this step-by-step, easy-to-follow tutorial to walk you through the procedure. To make the process as simple to grasp and follow as possible, we incorporated a lot of visual tips and examples.
What exactly are linear feet, and why do I require them?
The edge of a room is measured in linear feet, which is a straight line measurement. It’s formally defined as a figure’s perimeter measured in feet. Simply said, it is the sum of the lengths of all the walls in a room, and everything is measured in feet. The idea is depicted in the diagram below.
What are you expected to do with linear feet now that you know what it is? The linear foot is a measurement that is used to estimate how many cabinets you will need to furnish your kitchen.
Let’s have a look at an illustration. Consider the following scenario: you have 15 linear feet of space in which to install cabinets. You discover that each cabinet is 3 linear feet long and costs $100. As a result, 15/3 = 5 cabinets would be required. With each cabinet costing $100, you’d be looking at a total of $500.
How to calculate linear feet for kitchen cabinets with equipment?
A measuring tape will be required to determine the length of the walls. Although a yardstick or ruler may suffice, the measuring tape will provide the most precision.
You’ll need a notebook and a pencil to jot down all of your measurements and sketch out a plan. Although a notepad and pencil are preferred, any piece of paper and writing utensil will suffice. If you wish, you could even do it digitally.
Let’s get going to find how to calculate linear feet for kitchen cabinets
1st step
From a top-down perspective, draw two identical drawings of your kitchen’s walls. One drawing will be used for upper cabinets and the other for basement cabinets. You’ll only need one drawing if you only want lower cabinets or higher cabinets. Make careful to design the door in your plans.
2nd Step
Make a list of all the kitchen appliances you’ll need. If you need a rough notion of scale, a typical kitchen appliance is 30 inches long (stove, oven, refrigerator). It’s better to measure the length of your own appliances first, as this will give you the most accurate results.
Keep in mind that some appliances will be in both lower and upper cabinets (such as the refrigerator), while others will only be in lower cabinets (stove, oven, deep freezer).
3rd step
Draw a straight line along the walls where you want the cabinets to go in the drawings. It’s a good idea to do this for both the lower and upper cabinets. Don’t worry about the L shape (as seen in our upper cabinets) for the time being. In a later step, we’ll make the necessary adjustments.
We’ve drawn a straight line across each wall where we want cabinets on both the lower and upper cabinets in the diagram above. To make it as easy to interpret as possible, we utilized a distinct color for each line. It’s worth noting that we left enough room for the door to open and close.
4th step
In inches, measure the length of the cabinet wall. Make sure the measuring tape is flat on the floor and that you’re measuring along the wall’s edge. Always double-check your measurements to ensure there are no mistakes. If possible, enlist the assistance of a friend or family member. After you’ve double-checked all of your measurements, write down the length.
5th step
Add the lengths of all the lower and upper cabinets together. Then deduct 24 inches for each and every L form that exists. There are no L shapes in the lower cabinet in our case, thus no subtractions are necessary. Because there is only one L shape in the upper cabinets, we must remove 24, which is represented in red in the image below.
6th step
Divide the total of the lower and top cabinets by 12 to get the answer. You’ve measured the Linear Feet of your upper and lower kitchen cabinets successfully!
Steps to Take When Measuring the Square Feet of Cabinets
Before installing kitchen cabinets, we need to take precise measurements to prevent making costly mistakes. Cabinets have appealing features that are both practical and functional. Finding accessible square feet is an important part of the installation process.
However, this will decide the likely prices and essential equipment for task installation. Make a few simple mathematical equations and take careful observations.
- Step 1: Calculate the measurements of the room you’ll be using. Measure the size of the room where the cabinets will be installed. It will assist you in drawing that room.
- Step 2: Create a drawing of a bird’s-eye view. Make a rough sketch of your intended room with a pencil, ruler, and paper.
- Step 3: Measure your height and width. Now is the time to measure the height and width of the room where the cabinets will be installed.
- Step 4: Make a rough sketch. Draw a rough sketch of your desired cabinet area on a piece of paper in this phase. Then, alongside the height and width measurements, write the relevant dimensions.
- Step 5: Calculate the square footage. Then, as previously said, multiply the measurements to get the square feet. For instance, if your wall has a height of 4 feet and a width of 10 feet, the bearing square feet result will be 40 feet.
To calculate the true cost, combine the following options
Only the linear-foot measurements can provide you with the total costing information. This is because you’re estimating the total cost by combining your expected alternatives.
Imported, exotic hardwood, raised-panel doors, side-mounted full-extension hardware, and plywood-made construction are among the more expensive options. The following are some of the mid-range options:
- Maple.
- Red oak or ash are both good choices.
- The construction is made up of particle boards.
- Doors with an inset panel in the Shaker design.
- Drawer slides with a bottom mount.
- Alternatives that are less expensive.
Plastic or vinyl particle-board and center-mount single slides are the cheapest options. It also contains vinyl flat-panel doors and coarse particle-board jambs that are less than 34″ thick.
Birch, alder, or fir, plywood doors, and flat-panel doors are also reasonable possibilities. Underneath center-mount slides, however, there are up to 34″ thin particle-board kitchen cabinet alternatives.
Uppers and Bases: The most precise linear measures are determined using two drawings. This includes doing separate lineal-foot estimations for the top and lower cabinets. Spaces, windows, moldings, appliances, proportions, trim, and other options are all different. Calculating them all has an impact on the strategy as well as the costs.
Read more >>> Why Are Kitchen Cabinets So Expensive “With 10 Reasons”
What should the average cost per linear foot of kitchen cabinets be?
The cost of kitchen cabinets varies depending on the quality, design, and specifications. Stock cabinets are the greatest option if you want the cheapest cabinets. According to linear calculations, they will cost between $60 and $200 per foot. However, the cost of bespoke or semi-customized cabinets varies.
Semi-custom cabinets can cost anything from $100 and $650 per linear foot. However, for an exquisite kitchen, spend $50 to $1,200 per linear foot on customized/high-quality cabinets.
How many cabinets should I have in my kitchen?
A kitchen with a normal footprint of 10 feet by 10 feet typically contains 12 cabinets. However, that is only an average figure. The quantity of cabinets you need is entirely dependent on your goals. Feel free to go over and beyond the norm of 12 if you want the most usefulness and storage capacity. Feel free to have fewer cabinets if you desire a “less is more” minimalist look.
How to calculate linear feet for kitchen cabinets with windows?
Unless you have particularly large windows, the average window is in the middle of the wall, with lower and higher cabinets below and above the windows, respectively.
However, there is one thing to consider. The usage of the countertop on top of a cabinet as a cutting/chopping station is fairly popular. Temperature and breeze may become an issue if you place the cutting/chopping station in front of a window in the future.
It’s more of a design strategy than a measurement here. So, when designing the kitchen, consider what you’re going to do from a variety of angles. That’s how you notice small nuances like these.
What are the prices of kitchen cabinets?
The cost per linear foot, on the other hand, varies substantially depending on the grade of the material utilized. The price ranges shown below should give you a sense of what to expect. The cost of each item is listed from most costly to least expensive.
Material and characteristics determine the price range.
Expensive:
- Exotic hardwoods could be used.
- Doors with raised panels.
- Hardware is located on the side.
- The construction is made of plywood.
Moderate:
- Maple, red oak, or ash are all possibilities.
- Doors in the Shaker style.
- Panels with insets.
- Drawer slides are located on the bottom of the cabinet.
- The construction is made of particleboard.
Budget:
- Fir, birch, and Adler are examples of possible materials.
- Doors made of flat-paneled plywood.
- Underneath the slides are mounted in the center.
- Particleboard is used to construct the structure.
There are some alternatives to our budget plan that are less expensive, but we do not advocate them. Users have questioned the reliability and durability of the cheapest materials on several occasions.
Read more >>> How Long Does It Take To Paint Kitchen Cabinets
Conclusion on how to calculate linear feet for kitchen cabinets
We attempted to answer one of the most common issues faced by home cooks who are renovating their kitchens: How to calculate linear feet for kitchen cabinets. We described what linear feet are and then demonstrated how to use them with just a measuring tape and a piece of paper. You’ll have the linear feet for your upper and lower kitchen cabinets if you follow our illustrated six-step process. That’s all there is to it.
After you’ve taken your measurements, you’ll need to figure out what kind of cabinet you want to build. As a result, we attempted to respond to frequently asked topics such as how many cabinets do you need for your kitchen, do windows affect kitchen cabinet linear foot calculations, and how much do kitchen cabinets cost.
Fiestagrill.net hopes this article proved useful in determining the linear feet of your kitchen cabinets. Not only that, but we hope we’ve set you up for the next step in making your ideal kitchen a reality. Best wishes, and happy cooking!