When you try to use your remote and it doesn’t function, there could be various reasons for this. This is no cause for concern, as many of the troubles that your Element TV remote may encounter are simple to resolve on your own.
Check the batteries if your Element TV remote not working as a general rule. Because there is no indicator when your remote’s battery is low, changing it should always be your first step when you have a problem. Replace the batteries and test your remote once again.
The Element TV remote control isn’t working
It could be a problem with your remote or your receiver if your Element TV remote isn’t working. To figure out which one is affected, you’ll need to do a few steps. If the batteries in your Element remote have been replaced, make sure the remote is linked to your receiver.
There are a few approaches that can be used to overcome this problem. One option is to perform a Power Cycle. Turn off your Roku reviewer as well as the television. After that, unhook all of your devices from your TV, including their power connections. Allow five minutes for everything to be disconnected.
Restart your receiver and TV after reconnecting all of the cables. Examine your Element TV remote to determine if it is now operational.
If your Element TV remote is still not working after a Power Cycle, there could be a problem with the remote itself. Check that the IR emitter is still working to ensure that it is still functional. Press the power button after shining a light at the emitter on the top of your remote.
If there is no light, your Element TV remote may need to be replaced.
The Element TV remote is constantly disconnecting
There could be a problem with the signal or the cords if your Element remote keeps disconnecting. Check to see that everything is in working order and that there are no loose cables. Second, make sure you’re in the right range and that nothing is in the way of your connection.
As a general rule, if your Element TV remote continues disconnecting, you should reset your Element TV remote. To begin, take the batteries out of your Element remote. After that, you’ll want to switch off and disconnect your receiver, then wait ten seconds before restarting it.
After the ten seconds have passed, reconnect your receiver and restart it. Wait until your receiver has fully restarted before replacing the batteries in the element remote.
Another issue that can cause your Element remote to keep disconnecting is HDMI interference. This occurs when your receiver is directly plugged into your HDMI connector, which can create disruption. Investing in an HDMI extension can help you solve this problem.
The Element TV remote isn’t working
You’ve already replaced the batteries in your Element remote, but it still won’t work. Your TV and receiver will both be on when this happens, but your Element remote will not react to any commands. There are a few options for resolving this issue.
If your Element TV remote isn’t working, the first thing you should do is try something easy. Press and hold the home button on your Element remote. Your Element remote should connect itself after around ten seconds of holding the button. This is a simple method of reconnecting it.
If your Element remote is still not working, it’s time to reset it. Remove the batteries from your Element remote and press and hold the power button for approximately 25 seconds. Replace the batteries in your Element remote after 25 seconds and test it to see whether it works.
If that doesn’t work, try performing a power cycle on your Element remote. Turn off your Roku reviewer as well as the television. After that, unhook all of your devices from your TV, including their power connections. Allow five minutes for everything to be disconnected. Everything should be plugged in again, and both computers should be restarted.
If your Element remote is still not responding, check your system settings to see if it is connected.
Read More:
Volume control on Element TV isn’t working
It can be aggravating if your Element remote works and you can change stations and turn on and off your TV and receiver, but you can’t adjust the volume. Whether you have an additional remote, check to see if you can still adjust the volume on your TV.
Remove the batteries from your Element TV remote and your receiver before resetting your Element remote. Before resuming your receiver, wait 10 seconds. Replace the batteries in your remote and test it for functionality after your receiver has been fully restarted and displayed on the home screen.
If you’re still facing the wrong way, check sure your Element remote is set to TV mode. Because Element remotes are designed to be compatible with different devices, this can have an impact on how you use your TV remote. You won’t be able to manage the volume if your remote isn’t set to the TV set.
It’s also possible that the problem is with your remote. Remote controls, like most electronics, accumulate inadvertent crumbs or particles over time. When you press down on the volume button, make sure there is no resistance. If this is the case, pressurized air may be required to clean out the faulty buttons.
The Element TV remote doesn’t Connect/Pair
It’s possible that your Element TV remote will stop connecting or pairing with your device. Replace the batteries first, following the basic rule of thumb. If that does not resolve the problem, it is most likely a connectivity issue.
Remove and reinsert or replace the batteries in your remote if you haven’t already. Press and hold the home button on your remote for 10 seconds after replacing the batteries. As a result, your television will begin looking for your remote.
After 10 seconds, quick instructions should appear on your TV screen. To connect your remote to your TV, follow these steps.
The Element TV remote control isn’t changing channels
Your remote may function flawlessly in all other areas, but it may become stuck on one channel from time to time. If you’re having trouble changing channels with the channel +/- button, see if you can manually enter a channel number on your Element remote by typing it in.
Checking that you have all of the channels available is a smart starting step. On your remote, press Menu and scroll through the options until you locate the TV Guide Main Menu. Choose Setup from the drop-down menu. Look for the section labeled No Auto-Tune once you’ve entered. Toggle this function off with the left arrow. Exit the menu and try changing the channels again.
Conclusion
Run a Power Cycle on your Element remote if it still won’t change channels. Turn off your Roku reviewer as well as the television. After that, unplug all of your TV devices. Allow five minutes for everything to be disconnected. Everything should be plugged in again, and both computers should be restarted. See more useful articles at my website blog2success.net.